[Elecraft] HI Current

[KD7YZ]

Bruce tapped out:

> I occasionally get the Hi Current warning on my K3. I notice it cuts my
> power back about 10% from 100w. ........  I run the ATU which
> confirms SWR about 1.2 or so.
.
fwiw, my K3 is doing this quite often lately. I see it thru the KAT500
as well as the Palstar-AT-2K. Occasional, sometimes several in a row, when
the VSWR is 1.5:1 or less

-- 
73
KD7YZ Bob