[Elecraft] HI Current

[Matt VK2RQ]

Maybe there is not enough voltage at the power input to the radio — possibly due to high resistance at your power connections or in your fuse holders? 

73, Matt VK2RQ


> On 15 Dec 2014, at 8:18 am, Bruce Chadbourne <bruce.chadbourne at gmail.com> wrote:
> 
> To the list:
> 
> I occasionally get the Hi Current warning on my K3. I notice it cuts my
> power back about 10% from 100w.  My initial assumption is that my SWR is
> too high - but the SWR meter is easily less than 2.0  I run the ATU which
> confirms SWR about 1.2 or so.
> So what am I missing - something bad in my transmission line?
> 
> -- 
> Bruce KE1CY
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to matt.vk2rq at gmail.com