[Elecraft] K3: changing modes changes the frequency?
Joe Subich, W4TV
lists at subich.com
Sun Dec 14 13:34:44 EST 2014
The Owner's Manual is your friend ...
Search for Offset - page 29:
> SSB/CW VFO Offset
> The K3 can automatically offset the VFO frequency when you switch
> from SSB to CW mode, so other stations will hear the correct CW
> pitch. See CONFIG:CW WGHT for details.
and (page 55):
CW WGHT 1.15 Adjusts element/space timing ratio (weight) for the
internal keyer.
Additional functions of this menu entry, via numeric
keypad (Advanced):
Tap 1 to select SSB -CW (default) or SSB +CW (allows
CW in SSB modes).
Tap 2 to select @ = STOP (‘@’ character terminates
KY-packet transmission; default) or @ = ‘AC’ (‘@’
in a KY packet is sent as .--.-. [@] in CW mode).
Tap 3 to select OLD or NEW QSK (default). NEW reduces
AF keying artifacts.
Tap 4 to select VOX NOR (default) or AUTO OFF. The AUTO
OFF setting turns CW VOX off on power-up, avoiding
accidental keying by attached PCs, etc.
Tap 5 to select automatic VFO offset on SSB/CW mode
change (VFO OFS) or no offset (VFO NOR, default).
Automatic offset is often used on 6 meters, where
mixed-mode QSOs are necessary during fading. Note: Pitch
matching will be more accurate if USB is paired with CW REV,
and LSB with CW normal.
73,
... Joe, W4TV
On 2014-12-14 1:19 PM, Tom Blahovici wrote:
> Hi
> In comparing two k3s I am seeing completely different behaviour of the vfo a when modes are changed.
> If for example on one radio I am tuned in to wwv 10mhz, using am, the frequency on the radio shows 10.000.000 as it should. If I then change to cw, the radio all of a sudden reads 10.000.680.
> The other radio does not do this it stays at 10.000.000.
> Which menu option governs this?
> Can't find it!
> Thanks, Tom
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>
More information about the Elecraft
mailing list