[Elecraft] SignaLink and K3

[Bill Turner]

I am installing a new SignaLink USB device and have it all working
fine except for low output from the K3.  I can only get about 10 watts
out even with the Windows volume controls set as the factory suggests,
and with fldigi output set to maximum. The K3 line in gain is also set
to max. 

I know there is a jumper in the SignaLink USB to increase drive but
before I do that I'm wondering if what I'm seeing is normal. The
SignaLink USB manual says the default drive setting is OK for most
radios, so I'm wondering if the K3 is an exception or if I should keep
fiddling with the configuration.

All comments welcome.

73, Bill W6WRT