[Elecraft] K3 Paddle RTTY

[Oliver Dröse]

VOX on?

73, Olli

Contest, DX & radio projects: http://www.dh8bqa.de


Am 11.12.2014 02:46, schrieb Bert via Elecraft:
> It's been ages since I tried sending RTTY from my K3 using paddles; I've
> been using a SignaLink USB for RTTY for the past couple years! Anyway, I  set
> up the K3 for FSK D, plugged the paddle into the paddle socket on the back
> of the K3, and no RTTY!
> So I checked cabling, etc., and still no RTTY using paddles. I switched
> over to CW mode and CW worked just fine! Back to FSK D and no RTTY. I have my
> call in an M1 macro, so I pushed M1 and got RTTY (text decoded properly!).
> Then  I tried the paddles again -- nothing! So I pressed M1 and after my
> call was sent  and the FSK was "diddling", my paddles worked! When the diddling
> stopped, the  paddles no longer produced RTTY.
> What am I missing here?
> Bert, N4CW
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de
>