[Elecraft] SSB at something more then 2.2kHz?

[Phil Wheeler]

Don,

When reading this message last evening I looked at 
the Elecraft web site order page and could not 
find this K2SSBCAPKT (it was there when I looked 
in the Spring because I did a long print out of 
everything K2 related).

Is it still available but no longer listed?

73, Phil W7OX

On 12/7/14 5:03 AM, Don Wilhelm wrote:
> Frank,
>
> Do you have the KSB2 option installed in that K2?
> If so, the SSB FL1 filter should be set to "OP1" 
> instead of "2.2".
>
> If you do have the KSB2 option, look at the 
> board.  First check the markings on the crystals
> If they are 4913-S you have the new crystals on 
> that board.
> Then see if there are capacitors in the CB and 
> CN locations.  If not, the width is the newer 
> 2.4kHz, but if you do not have capacitors there, 
> you can order the K2SSBCAPKT and change the 
> width to 2.4kHz (or even 2.6kHz if your BFO 
> range is sufficient). You must have the 4913-S 
> crystals installed to take advantage of that 
> increased filter width.
> New KSB2 options come with capacitors for the 
> 2.4kHz width.
>
> 73,
> Don W3FPR
>
> On 12/6/2014 9:09 PM, Frank Krozel wrote:
>> OK, pondering this after listening on the K2 to 
>> SSB tonight…. Has anyone tried to align the SSB 
>> module to get something more then 2.2kHz?
>> I was thinking of 2.4, 2.0, 1.7 as my filters 
>> when I get the SSB module.
>> Frank KG9H