[Elecraft] Jumpers for the K2 mic?

[Matt VK2RQ]

When you place your order, mention in the comments section that you want a headphone jack or two (email parts at elecraft dot com to get the part number/pricing). When I bought my K2 I ordered an extra headphone jack as a spare because I heard they can wear out after some time.

73,
Matt VK2RQ

> On 7 Dec 2014, at 12:52 pm, Frank Krozel <kg9hfrank at gmail.com> wrote:
> 
> Oh, it was broken and sold that way to me.. In order to hear “something” out of the speaker, you have to insert a headphone into the hole about 1/2 way lol
> Frank
> 
>> On Dec 6, 2014, at 7:49 PM, Phil Wheeler <w7ox at socal.rr.com> wrote:
>> 
>> The headphone jack should be unrelated to the mic config header and the KSB2 board. Why do you think you need a new headphone jack, Frank?
>> 
>> Phil W7OX
>> 
>>> On 12/6/14 5:47 PM, Frank Krozel wrote:
>>> So guess replacing my “headphone jack” will be a part of this process as well.
>>> Frank
>>> 
>>>> On Dec 6, 2014, at 7:39 PM, Matt VK2RQ <matt.vk2rq at gmail.com> wrote:
>>>> 
>>>> The “missing” PCB header is supplied with the KSB2 SSB option module. If you order a MH2 microphone, you’ll get a packet of PC-style jumpers to bridge the header. Otherwise, if you use a different type of microphone, you need to take care for the jumping yourself. The “UNPCB” guy sells a nice jumpering PCB that allows you to easily change the jumper setup for a range of standard mics, suggest you look it up below (look for “Internal Mic Adaptor”):
>>>> http://www.unpcbs.com/
>>>> 
>>>> 
>>>> 73, Matt VK2RQ.
>>>> 
>>>>> On 7 Dec 2014, at 12:36 pm, Frank Krozel <kg9hfrank at gmail.com> wrote:
>>>>> 
>>>>> All I “see” are pc holes that are unpopulated.  I am thinking there is a header missing or similar.
>>>>> I was kind of looking for a jumper block.
>>>>> Frank'
>>>>> On Dec 6, 2014, at 7:27 PM, Phil Wheeler <w7ox at socal.rr.com> wrote:
>>>>> 
>>>>>> Frank, for the K2 (I think that's the rig you mean) the info you need is in this document "ELECRAFT KSB2 S SB ADAPTER
>>>>>> Assembly and Operating Instructions". Near the end is the info for configuring it for various mics.
>>>>>> 
>>>>>> When you said "Mine was inoperative when I got it used" do you mean on SSB or completely?  Does it have the KSB2 option installed?
>>>>>> 
>>>>>> 73, Phil W7OX
>>>>>> 
>>>>>>> On 12/6/14 5:20 PM, Frank Krozel wrote:
>>>>>>> Guys, I am about ready to place an order to Elecraft and one of the items I will be needing are a few of the connectors like P3, P6, and the headphone jack.  Mine was inoperative when I got it used..
>>>>>>> Where is the jumper block for the mic?  Been staring at the pictures and cannot find the manual where it shows where the jumper block is.
>>>>>>> I guess it is on the control panel but cannot find any picture of that in case I need some additional connectors.
>>>>>>> (I got it used and it is in perfect condition!!)
>>>>>>> Frank KG9H
>> 
>