[Elecraft] New PSK set up - no joy

[Joe Subich, W4TV]

Have you followed the "Setting Audio Levels" section of the
microKEYER Users manual *exactly*?

73,

    ... Joe, W4TV

On 2014-12-04 8:24 PM, w3sb wrote:
> Hello,
>
> I'm trying to get on PSK31 with a new Windows 7 64-bit computer. I've read the owner's and Cady manuals, checked and re-checked the settings and still no joy. The setup is the K3, ASUS Xonar U7 external sound card, microKEYER interface and FLdigi. Basically I have no power output and no ALC indication. Receive is OK. Here are the K3 settings:
>
> MODE=DATA A
> MIC SEL=LINE IN
> VOX=ON
> VOX GN=50
> LINE=40
> PWR=20
>
> In FLdidi:
> PortAudio checked
> CAPTURE=LINE(Xonar U7)
> PLAYBACK=SPEAKERS(Xonar U7)
>
> In FLdigi if I start a message, PTT turns on OK but turning the MIC(LINE) knob has no effect and there is no power out (Bird watt meter). When a message is started, if I look in the CONTROL PANEL > SOUND, I see modulation via the Playback (Speakers) bar graph at the 60% level.
>
> I have the setup working on RTTY with MMTTY just fine but PSK is giving me fits. Suggestions are certainly welcome!
>
> 73, Monty W3SB
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>