[Elecraft] KX 3 Intermittent problem power up problem

[David Orman]

Sorry just saw you were running the most recent firmware. Since that's a
non-issue (again, apologies for not reading thoroughly enough) question
still remains re: power supply/battery unit. My question is - if you can
run off a different power source do you see the same behavior?

On Mon, Dec 1, 2014 at 9:07 PM, David Orman <ormandj at corenode.com> wrote:

> I have not run into this. Are you running the most recent stable firmware?
> How are you supplying power to your unit? Do you have the battery module
> option installed?
>
> Thanks,
> David/K5DJO
>
> On Mon, Dec 1, 2014 at 8:52 PM, l s via Elecraft <elecraft at mailman.qth.net
> > wrote:
>
>> Has anyone with a KX3 experienced this problem? When turning the kx3 on
>> with theband- and atu tune buttons the back ground leds come on but no
>> screen display. Removing the power cable and letting it sit there
>> disconnected for a few hours and then when power up is turned on
>> everything starts working just fine. This occurs intermittently several
>> times a day.
>> Have performed the parameter initialization as per the instructions on
>> page 46 of the manual and upgraded to the latest firmware version but no
>> help.. the problem still exists. Any suggestions short of sending it back
>> to Elecraft. S/N 6652. Tnx for reading it.Lou KI6UM
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ormandj at corenode.com
>
>
>