[Elecraft] VOX SET Command?

[Oliver Dröse]

Hi Randy,

doesn't the KX3 store VOX status per mode anyway? Never tried myself 
with DATA but know for sure it does for CW, i.e. CW has VOX on while SSB 
has not and keeps it like this when switching between modes. That would 
make a command obsolete. ;-)

73, Olli - DH8BQA

Contest, DX & radio projects: http://www.dh8bqa.de


Am 29.11.2014 02:16, schrieb Randy Diddel:
> Good evening, night, day, etc.
>
>
> I have been working hard on getting my KX3 programmed to switch between
> voice and digital modes using a string of commands assigned to PF1 and
> PF2.  I have them working perfectly except for setting VOX to ON for data
> modes.  In the programmer's manual from Elecraft, it states that "A SET
> version of the command is planned."  Has this been implemented?  Does
> anyone know the syntax?
>
> For those interested here are the two strings:
>
> For Data:  MD6;PA0;MG005;AG001;DT0;BW0400;PC12;PC015;ML000;
> For Voice:  MD2;MG005;BW0240;SWH34;PA1;ML000;AG040;PC110;PA0;
>
> These really help out as I can be working JT65 and see a new one on the
> clusters, switch over, and jump in the side band pile up.  VOX works best
> with WSJT-X and my specific configuration-that is why it would be good to
> have a bit to set it ON in the string listed above and a bit to switch it
> off when I switch to voice mode.
>
>
> 73
>
> K5RHD
>
> /randy
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de
>