[Elecraft] [Bulk] Re: [Bulk] Re: XV432 - Is L19 red, orange or yellow?

[Ken Alexander]

Don...not Dan!  Sorry!

Ken



> On Aug 30, 2014, at 10:30 PM, Ken Alexander <k.alexander at rogers.com> wrote:
> 
> Hi Dan,
> 
> Wow!  That's a lot of money to spend only to find I don't need the darn thing!  I'll be talking to Elecraft about that next week.    I ordered both about 3 weeks ago.  Thanks for letting me know.  I appreciate it!
> 
> 73,
> 
> Ken
> 
>> On 2014-08-30 9:04 PM, Don Wilhelm wrote:
>> Ken,
>> 
>> If you have a recent XV432 (within the past 2 months), it is being shipped with the High Accuracy crystal.
>> Look at the markings on the crystal that came with the XV432, and compare it with the crystal shipped with the High Accuracy Kit - if it is the same, you can put either crystal in and Check L19 as well, they should be the same.
>> 
>> In other words, the High Accuracy Kit is a retrofit for older XV432 transverters, and is not necessary for new ones.
>> 
>> 73,
>> Don W3FPR
>> 
>>> On 8/30/2014 6:26 PM, Ken Alexander wrote:
>>> Hi folks,
>>> 
>>> I'm working on my XV432 kit this weekend.  I ordered the high accuracy crystal and the crystal oven options as well.  I'm on page 31 of the XV432 manual, where it is asking me to locate L4 and L19 for installation.  I see that L19 appears to get replaced when installing the high accuracy crystal option.
>>> 
>>> The manual says:
>>> 
>>> L4 has an orange body with four turns.  (It looks red to me and it has 3.5 turns, close enough I guess)
>>> L19 has a yellow body with four turns.  (I count 4.5 turns,