[Elecraft] Data Mode Sideband

[Don Wilhelm]

Mike,

Do you have MMTTY set for 1445Hz Mark *and* the K3.  Hold PITCH button 
to check/change.
That would make a difference in AFSK A, but not in DATA A mode

73,
Don W3FPR

On 8/23/2014 3:00 PM, Mike Harris wrote:
> Not so sure.  I monitored the TX frequency on another RX and the only 
> change was the slight shift I mentioned, not what would, in my case 
> (1445Hz Mark) be approx 3kHz.
>
> Using DATA A, which really does swap sideband results in a near 3k 
> frequency shift.
>
> Regards,
>
> Mike VP8NO
>
> On 23/08/2014 15:27, Joe Subich, W4TV wrote:
>>
>>> Mode AFSK A normal LSB. I assumed that if by using the ALT function
>>> and consequently switching to TX DATA REV that the sideband was
>>> switched from LSB to USB.
>>
>> It is.
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>