[Elecraft] K3, KX3 and XV series external 10 MHz reference

[Don Wilhelm]

John,

That is already in place for the K3 with the External Reference (part of 
the KXV3 option).
True that does not help with the XV series LO, and I am not certain 
where another connector could be added to the KX3 unless the 2 meter 
option were not installed and the SMA connector for that option were 
used for the external reference option.

73,
Don W3FPR

On 8/18/2014 6:02 PM, John Lawrence via Elecraft wrote:
> Focus Group Thoughts for Elecraft  Re: KX3 and K3 drift on VHF Digital Applications
>
>
> What about adding an external phase lock option that would also allow
> the 10 MHz reference phase lock and GPS sync?  Many of the digital mode aps are
> needing this kind of stability and the KX3 with an internal 2 meter board or external XV transverter family choice.  The XV series transverter LOs could have a kit for phase lock too.
>
> There are so many interested in WSPR and you have one of the gurus up north of Elecraft who's already done a design.  This also would bring the Elecraft product up to what's new and state-of-the-art for both the K3 and KX3 in digital communications....
>
>