[Elecraft] KX3-2M CW Drift

[Brian Hemmis]

Mine drifts like crazy on 6 meters but I haven’t done the temp. comp. Will that help ? It’s not my main 6 meters radio (my K3 is) so it hasn’t been a big concern.

> On Aug 17, 2014, at 12:21 PM, Wayne Burdick <n6kr at elecraft.com> wrote:
> 
> This is within spec, though we're still looking at ways to further reduce it. 
> 
> 73,
> Wayne
> N6KR
> 
> On Aug 17, 2014, at 4:20 AM, Chris Johnson <elecraft at ozy.us> wrote:
> 
>> I have two KX3's each with a 2M module.  Both units have had the temp calibration done to them.   When using CW,  there is a noticeable drift in the received CW side tone.  It has an unsable warble back and forth slowly +/- ~10 HZ or so.  Is this the natural drift of the 2M unit I'm seeing here?  If so I'm assuming that's as good as it gets.
>> 
>> Chris
>> K6OZY 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bhemmis at mac.com