[Elecraft] K2 audio images strong signals 40 meters

[Don Wilhelm]

Paul,

Just another thought on you issue.
Do you have the internal frequency counter probe inside your K2?  If so, 
remove it.
It should not be plugged in with the KPA100 installed in any case 
because there is a possibility of spurious responses.  I have never 
heard of it causing a problem on receive, but yours could be the first 
report.
If you do find it is the internal probe causing the problem, let all on 
the reflector know about it, please.

73,
Don W3FPR

On 8/6/2014 3:55 AM, paulb wrote:
>   Hi folks
>
> K2 here has what appears to be an odd issue with strongs sigs
> around 7175Khz
>
> Tuning approx 5 Khz higher the same signal can be heard several s-points
> down.
>
> Best guess seems to be centred around the 7175 - 7180 range.
>
> I have a distant memory reading about this many years ago at build,
> it's been a while..
>
> thanks
>
> cheers
>
> Paul b
> zl1aly
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K2-audio-images-strong-signals-40-meters-tp7591965.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>