[Elecraft] Remote operation question

[Mitch Wolfson DJØQN]

Jim,

To be able to find the problem, you will need to add some details as to 
what the "defect" sounds like. There are many possibilities and we need 
more details. The new firmware should not necessarily cause a problem, 
but may if the difference between the two RRC's is significant. There is 
no reason not to update the control RRC and see if that solves the problem.

I also recommend that you repost this on the RemoteRig forum 
http://www.remoterig.com/forum/index.php if the firmware update does not 
solve this to receive a response from the developers if needed.

73,
Mitch DJ0QN

Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378

On 05.08.2014 04:22, Jim - KE8G wrote:
> Hi All,
> I seem to be having a problem with my RemoteRig operation.  Everything worked perfectly when I initially set it up.  While at the remote QTH, the only change I made was to add the newest firmware to the K3.  I have not updated the firmware at the K3 control station, would this cause a problem?
>
> I had a person tell me the rig sounds like it has a "defect."
>
> Looking at things from the control end, the KAT500 & KPA500 both appear fine, no changes in SWR or power output.
>
> Any ideas?
>
> 73 de Jim - KE8G
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dj0qn at arrl.net
>