[Elecraft] P3 panadapter with K2?

[Matt VK2RQ]

You'll need to add a buffer amp, at the very least, like this:
http://www.cliftonlaboratories.com/z10000_buffer_amp.htm

Normally this would be used with a softrock rather than a P3, so I haven't really looked into what else might be required to integrate and make the K2 work with the P3.

73,
Matt VK2RQ

> On 4 Aug 2014, at 7:06 am, Thomas Taylor <linxt at comcast.net> wrote:
> 
> Has anyone on this list used a P3 panadapter with the K2 transceiver?  Is it
> directly plug compatible or does it need a custom interface/cable and where can
> that be obtained?
> 
> Thanks, Tom  KG7CFC
> 
> -- 
> "To be free is not merely to cast off one's chains, but to live in a way that
> respects and enhances the freedom of others."  
>  - Nelson Mandela
> 
> ^^  --...  ...--  / -.-  --.  --...  -.-.  ..-.  -.-.
> 
> ^^^^
> Tom Taylor  KG7CFC
> openSUSE 13.1 (64-bit), Kernel 3.11.6-4-default,
> KDE 4.11.2, AMD Phenom X4 955, GeForce GTX 550 Ti (Nvidia 337.19)
> 16GB RAM -- 3x1.5TB sata2 -- 128GB-SSD
> FF 27.0, claws-mail 3.10.0
> registered linux user 263467
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to matt.vk2rq at gmail.com