[Elecraft] K3 to IC-2KL

[Cady, Fred]

Hi John,
Have him have a look at K-Line Introduction and Set Up Guide (pdf) on www.ke7x.com.  The basic set up for the K3-KPA500 should work for the Icom amp as well.  He may need to set up the K3's CONFIG:TX DELAY to make sure the amp switches before the K3 transmits. 
Cheers and 73,
Fred KE7X

"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
"The Elecraft KPA500 and KAT500 - the K-Line Dream Station"
Printed, coil bound copies of these are all available at www.elecraft.com
PDF versions available from www.ke7x.com

KPA500 and KAT500 Quick Set Up Guide:
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of John Huffman
Sent: Sunday, August 03, 2014 8:13 AM
To: Elecraft List
Subject: [Elecraft] K3 to IC-2KL

All -

I have a friend who would like to hook his new K3 to his Icom IC-2KL amplifier.  Anyone have this setup?  Might you provide the specific cabling needed to make them work together?  He's not wanting band tracking, just the basic setup.

Thanks in advance,
73 de K1ESE
John


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to fcady at ece.montana.edu