[Elecraft] K3 and Y-cable E980190

[Jim Rhodes]

There was much discussion about this when the tuner and amp came out. Many
of the standard via cables have several pins wired together and will not
work. I wired a couple on connectors in parallel in the output side of my
hb RTTY interface. Helps reduce cable clutter.
On Aug 2, 2014 10:34 AM, "Jukka Kulha" <jukka.kulha at phnet.fi> wrote:

>
> Hi all,
>
> Can someone confirm if the K3 Y-cable/E980190 is similar as standard VGA
> y-adapter ( e.g. in below link) or is there some differences from wiring
> point of view?
>
> http://www.amazon.com/Cable-Matters-Monitor-Splitter-Foot/dp/B005H3I38G
>
> 73 de Jukka - OH2MA
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com
>