[Elecraft] FW: New KX3 ATU Not Working

[Randy Moore]

Thanks, but the PA.MODE MENU was turned on the MENU.  I turned it off and
now everything works.



-----Original Message-----
From: Don Wilhelm [mailto:w3fpr at embarqmail.com] 
Sent: Friday, August 01, 2014 9:35 PM
To: Randy Moore; Elecraft at mailman.qth.net
Subject: Re: [Elecraft] FW: New KX3 ATU Not Working

Randy,

Parameter Initialization will set all menu parameters to the defaults.
The default for ATU MD is "Not Inst".

Go to the ATU MD menu and set it to either BYP or AUTO.

73,
Don W3FPR

On 8/1/2014 8:50 PM, Randy Moore wrote:
> Help,
>
>   
>
> I just got my new KX3 today, set it up and everything worked all day, 
> including the ATU.  I shut the radio down, put it away and went out.  
> Got back this evening, set the radio up and turned it on.  Tried to 
> use the ATU and I get the message NO ATU.  In the menu it says no ATU 
> installed.  I tried a Parameter Initialization and that did not help.  
> Any ideas as to what could be wrong?  And is there a more in depth reset?
>
>   
>
> Thanks,
>
>   
>
> Randy Moore
>
> AI4CO
>
>   
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> w3fpr at embarqmail.com
>