[Elecraft] Anyway to get better Low Frequency Audio response out of the K3?

[Harry Yingst via Elecraft]

Thank you

I was thinking that may be the answer, at least until I start doing more JT9 & JT65 combined




________________________________
 From: Lyle Johnson <kk7p4dsp at gmail.com>
To: Harry_Yingst <hlyingst at yahoo.com>; elecraft at mailman.qth.net 
Sent: Wednesday, April 30, 2014 10:01 PM
Subject: Re: [Elecraft] Anyway to get better Low Frequency Audio response out of the K3?
 

Not at present.

You might try tuning a little lower in dial frequency, say 100 or 200 
Hz, to shift the signals in the waterfall to correspondingly higher 
pitches.  Of course, if the waterfall is full end-to-end, then you'll 
experience some roll-off at the high end.

73,

Lyle KK7P


> When running JT65 the K3 rolls off on the low end of the audio.
>
> This tends to reduce the output power when trying to work a station on the
> low end of the waterfall.
>
> Is there a way to open up the low end to get a little better Response on the
> low end?