[Elecraft] K3 Tx audio coming through speaker

[Don Wilhelm]

Graham,

Turn on TX TEST mode and see if that condition is still present.
If it is, double check the MON setting to be certain you did not 
inadvertently change it while trying to adjust the power level or 
compression.

If it is gone with TX TEST, next try it while transmitting into a dummy 
load.
If it is still gone with the dummy load, I would suggest you look to see 
what has changed in your antenna system because at that point I would 
suspect some type of RF feedback.

73,
Don W3FPR

On 4/30/2014 3:51 PM, Graham Pemberton wrote:
> Hi,
> Yes, definitely coming from the K3 I have not got anything connected at all apart from the antenna.
>
> Graham
>
>