[Elecraft] How can I set the top edge of a transverter band?

[Don Wilhelm]

Not currently, that requires a Band Change on the K3.  The same as going 
from "say" 40 meters to 10 meters.

You could ask Elecraft for automatic band changes based on tuning from 
one band to another, but that function is not currently available.

I might suggest that you set up the K3 "Quick Memories" to accomplish 
easy and quick band changes.  That is much better IMHO than using the 
Band+ and Band- buttons.

73,
Don W3FPR

On 4/29/2014 5:59 PM, Harry_Yingst via Elecraft wrote:
> I use a converter to listen to below 500 kHz that I have setup on a
> transverter band.
>
> Is there a way to have it switch automatically as I dial up past 500kHz from
> the
> Transverter to the regular input? (basically a upper limit for the
> transverter band)?
>
> Thank you
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/How-can-I-set-the-top-edge-of-a-transverter-band-tp7588146.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>