[Elecraft] K3 - Sub RX audio to right Line Out

[K4ia via Elecraft]

Thanks Sam but that isn't it.  I get the Sub RX audio just fine in the 
headphones.

What I am missing is the Sub Rx on the right channel of the Line Out 
jack on the back of the radio.

Buck
k4ia
K3# 101  KX3 #715

On 4/28/2014 10:57 PM, Sam Morgan wrote:
> also you might have the sub set to AUX Antenna with no antenna on it?
>
> hold RX ANT button and watch to see the vfo b window say MAIN
>
> On 4/28/2014 9:54 PM, Sam Morgan wrote:
>> maybe you have the 2m module and were using RF/SQL for squelch?
>>
>>
>> page 37 of manual tells all the tricks
>>
>> SUB AF gain normally sets the sub’s volume
>> level. Alternatively, SUB AF can be used as a
>> main/sub balance control (see CONFIG:SUB
>> AF). With stereo headphones or dual speakers,
>> you'll normally hear main on the left and sub on the
>> right. CONFIG:L-MIX-R selects various alternate
>> combinations of main/sub audio mixing.
>>
>> CONFIG:SPKRS must be set to 2 if you use
>> stereo speakers; otherwise, set it to 1.
>> SUB RF gain normally sets the sub receiver’s
>> RF GAIN level. If this knob is assigned to main/sub
>> squelch (CONFIG:SQ MAIN), then RF gain for
>> main/sub is controlled by the main RF gain control.
>>
>> hope that helps
>>
>> On 4/28/2014 9:32 PM, K4ia via Elecraft wrote:
>>> I am trying to set up the K3 Sub Rx audio to come out on the right Line
>>> Out.   I hear nothing on that side.  The Main Audio is fine on the left
>>> side.
>>>
>>> I can't find anything about a setting that would control this.  I
>>> thought it would be automatic.
>>>
>>> Can someone point me in the right direction please?
>>>
>>
>