[Elecraft] W2.exe Question

[Michael Walker]

No, it isn't actually.  It scans all com ports when start up.  I can see it
when it starts up on my remote base.  Even when you have selected a port.

I actually want a smaller version of the W2 so that it just shows 2 bars.
 Call it a 'compact' mode view.

Mike va3mw



On Mon, Apr 28, 2014 at 4:07 PM, Don Wilhelm <w3fpr at embarqmail.com> wrote:

> Chris,
>
> Go into Setup and select the port that you want to use for the W2.
> That selection should be "sticky".
> Once that port is selected, it will not scan for eligible ports.
>
> 73,
> Don W3FPR
>
>
> On 4/28/2014 3:15 PM, Chris Johnson wrote:
>
>> Is there a way to disable the W2.exe from "scanning for W2".  I have many
>> virtual com ports on my computer, some of which are over the network, and
>> it takes nearly one minute for it to timeout the scan on program launch.
>> Is there any command line switches to make it not autoscan and try an
>> explicitly defined port only?
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va3mw at portcredit.net
>