[Elecraft] KX3 and FLDIGI

[Adrien Dessemond]

Don,

My error I apologize, "AUDIO A" should be read as "DATA A" in my
original post. My concern was the transmission mode used by the KX3
once FLDIG triggered a data transmission as it does not seem to stay
in "DATA A" mode anymore, I will dig inside the Hamlib ...  :-) Thank
you your answers.

73,

Adrien VE2AKS


2014-04-22 20:14 GMT-04:00 Don Wilhelm <w3fpr at embarqmail.com>:
> Adrien,
>
> I am confused by your statement that you see "AUDIO A" on the LCD.
> There is no "AUDIO A" mode and no characters on the LCD indicate that
> information.  Yes, there is a "DATA A" Data sub-mode that should be selected
> for soundcard data modes (except for RTTY where "AFSK A" provides added
> advantages for RTTY).
>
> For most soundcard data modes, you would want to use DATA A submode in USB.
> RTTY normally uses LSB, but RTTY is best used in AFSK A data sub-mode.
>
> Your data mode software application and the KX3 default settings may be
> "fighting each other".
>
> 73,
> Don W3FPR
>
>
> On 4/20/2014 4:18 PM, Adrien Dessemond wrote:
>>
>> Hi,
>>
>>
>> I am trying to use a KX3 with FLDIGI to do some PSK31 QSO. The KX3 is
>> connected to the computer via a serial cable and FLDIGI has been set
>> up to use the hamlib ("K3/KX3 beta") and I manually put the KX3 in
>> "DATA-A"  mode: I can see "USB", "TX DATA" and "AUDIO-A" on the KX3's
>> LCD. However whenever I transmit some data with FLDIGI, the "USB"
>> indicator turns off. Is the rig still in AUDIO-A mode ("TX DATA" is
>> still shown)?  Else which transmission mode I am supposed to use in
>> FLDIGI for that rig? PCKTUSB/PCKTLSB or simply USB/LSB?
>>
>>
>



-- 
Adrien Dessemond / VE2AKS