[Elecraft] P3 or K3 oddity

[W0MU Mike Fatchett]

Thanks for the heads up on the BNC cables.  I am not sure where I got 
the one I am using.  I will swap out the cable and see if the issue is 
still there.

Mike W0MU

On 4/20/2014 12:49 PM, Dave Hachadorian wrote:
>> Try moving IF connector, P3 and K3 side, disconnect and connect
>> and check
>> presence of spurious signal. I did same problem and fixed
>> changing IF cable
>> with high quality cable and connectors.
>
> In my experience, the I.F. cable between the K3 and P3 is quite
> finicky when it comes to the quality of cable and connectors.  I
> have just replaced my two P3 cables with these:
> https://www.cablewholesale.com/specs/10x1-01103.php
>
> These cables have a copper braid and aluminum foil shield, the
> molded transition from connector to cable looks beefy and solid,
> and the connectors fit well.  Prices and shipping are very
> reasonable.
>
> Thanks to Hank, W6SX, for pointing out cablewholesale.com as a
> good supplier.
>
> Dave Hachadorian, K6LL
> Yuma, AZ ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w0mu at w0mu.com