[Elecraft] [P3]

[Brian Hunt]

I tried to replicate your problem but didn't observe what you describe.  
In each case the MKR A followed the band I selected.  I rarely use the 
markers so I wouldn't have noticed anything in the past.  You could try 
a Parameter initialization (P3 Manual, page 28) but you would have to 
re-enter all the non-default menu parameters and function key assignments.

73,
Brian, K0DTJ


On 4/20/2014 6:29 AM, Mike Reublin wrote:
> Anyone?
>
> On Apr 19, 2014, at 12:39 PM, Mike Reublin <nf4l at nf4l.com> wrote:
>
>> When I change bands on the K3, the marker A cursor doesn't always follow. Going from 17M to 20M the A cursor freq readout jumps to 10M. Going back to 17M then to 20M, it's in the 20M band.
>>
>> What's the explanation?
>>
>> 73, Mike NF4L
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nf4l at nf4l.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to huntinhmb at coastside.net
>