[Elecraft] [K3] FPF failed

[Mike Reublin]

Thanks, David -

As I said, I had downloaded the latest & greatest. Even  sending the update file by file failed. K6KR suggested it may be a memory problem, and to contact Elecraft support.

73, Mike NF4L

On Apr 19, 2014, at 5:04 PM, David Sanders W4DES <david at sandersweb.net> wrote:

> Previously seen on the reflector from Don:
> Try this - first download the latest K3 Utility and get the new firmware files as usual (Check for New Firmware). Then using the Advanced tab of K3 Utility, Check the DSP1 box and click "Load checked firmware”.  When that completes, do the same for the FPF loading only that firmware.  After you do that, you can exit from the Advanced screen and the Send all Firmware to the K3.
> 
> Let us know if that works.
> 
> 
> 73, David W4DES
> 
> 
> On Apr 19, 2014, at 3:13 PM, Mike Reublin <nf4l at nf4l.com> wrote:
> 
>> Trying to help a friend with loading the latest firmware. I have the latest (Mac) utility and the latest firmware. The load fails at the FPF step. I've done the force procedure, no joy.
>> 
>> Suggestions?
>> 
>> 73, Mike NF4L
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w4des at sandersweb.net
>