[Elecraft] A KX3 Oddity when Changing LED BRT setting in Menu

[Nr4c]

The backlight only is on or off. But if you turn VFO A knob you can adjust the intensity of the various LEDs. 

Sent from my iPhone
...nr4c. bill


> On Apr 19, 2014, at 6:08 PM, Phil Wheeler <w7ox at socal.rr.com> wrote:
> 
> This may be new or may have been there all along, because while I do Backlight Off when operating outdoors, I don't think I've changed the brightness until today.
> 
> So I'm running though the menu looking for something else and come to the LED BRT item and wonder what the different brightnesses look like. But I found that turning the main dial has the following effect:
> 
> * LED backlight goes off
> * TX light goes on (but KX3 does not appear to
>   be in TX mode); the other three LEDs come on, too.
> * This is the same light combo I see transiently
>   at KX3 power on.
> * The LED BRT does respond to moving the main
>   dial to set it.
> * Leaving menu turns off the LEDs and turns the
>   backlight back on.
> 
> Is this normal behavior? If not, what should I do next?
> 
> 73, Phil w7ox
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com