[Elecraft] PSK Problem
Joe Subich, W4TV
lists at subich.com
Sat Apr 19 13:48:47 EDT 2014
Have you performed the audio configuration of microKEYER II as
described in the MK II Users Manual? Follow that procedure *exactly*
as written - do not move on until you achieve the results described.
73,
... Joe, W4TV
On 4/19/2014 12:57 PM, Christopher Soames wrote:
> Hi All, have been having problems with PSK on my K3. I am using a
> Microham2 Keyer into the K3 via the D connector and appropriate
> connections on the K3.
> I cannot TX though as I get no signal to the K3 output.
> In Test mode with TX flashing on the K3 I see no indication of ALC
> readings when I adjust the Mic knob when compression and ALC display is
> shown.
> When meter is in pwr mode `I see no indication of any power out either.
> When in normal data TX mode (Not test) I have no indications of alc or
> power showing on the bar graph either, but the K3 TX red light comes on
> to indicate TXing. I have no replies to an calls and a colleague who was
> testing with me did not RX anything from me at all.
> I can RX fine.
> All other modes work fine RTTY SSB and CW.
> Any help gratefully received.
>
More information about the Elecraft
mailing list