[Elecraft] P3 or K3 oddity

[W0MU Mike Fatchett]

The peak is about 2khz away.

Mike W0MU

On 4/18/2014 5:15 PM, Jim Brown wrote:
> Mike and Johnny,
>
> In CW mode, set the P3 for the narrowest Span (2 kHz), then use the 
> cursor to find the difference in frequency between the VFO and the 
> spurious signal. That will be the clue as to its source.
>
> 73, Jim K9YC
>
>> On 6m I notice a noise source just above or to the right of my vfo
>> frequency.
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w0mu at w0mu.com