[Elecraft] K3: reduced PWR in Data Mode on 10m only

[Bob KD7YZ]

On 4/18/2014 08:25, Don Wilhelm wrote:

> You may want to put them at the antenna feedpoint, 


> If your feedline runs away from
> the antenna perpendicular to the radiator for at least 1/4 wavelength,


Kinda seen in the picture I put, at the bottom of others, on QRZ (link
below).
450-ohm line circa a hundred feet of it to balun, then about ten feet
RG213 to KAT500


-- 

Bob KD7YZ
AMSAT LM 0901
http://www.qrz.com/db/KD7YZ
www.denstarfarm.us/LGD