[Elecraft] K3: reduced PWR in Data Mode on 10m only

[Bob KD7YZ]

On 4/17/2014 23:02, Don Wilhelm wrote:
> Bob,
> 
> Does the same thing happen if you operate into a dummy load?


Ah Don W. ,   Perfect as ever!

I put the Dummy-Load onto KAT500 ANT#3 and stepped through the bands,
initiating a "Tune" on each. Then I transmitted Tx-Data mode and was
able to get the 50 to 60 watts I was looking for: 160m through 10m.


> If all is OK into a dummy load, then the K3 is OK, but you have
> RF-in-the-shack issues to resolve - add current mode chokes to your
> antenna feedlines.

Off-Hand,  can you, or anyone,  suggest which ones might suffice for my
RG213 coax?


-- 

Bob KD7YZ
AMSAT LM 0901
http://www.qrz.com/db/KD7YZ
www.denstarfarm.us/LGD