[Elecraft] Suggestions for a 2 meter amp?

[Charlie T, K3ICH]

I would suggest the TE Systems 1452G.

Same here on the K144XV power out.  6 - 8 watts max which is fine for this 
amplifier.

I have found that all the TES amps don't need anywhere near their rated max 
input to achieve full output.

73, Charlie k3ICH


----- Original Message ----- 
From: "Michael Eberle" <mteberle at mchsi.com>
To: <elecraft at mailman.qth.net>
Sent: Tuesday, April 15, 2014 11:41 PM
Subject: Re: [Elecraft] Suggestions for a 2 meter amp?


>I use a Mirage B-310-G with my K144XV. It is rated at 3W in 100W out, but 
>the power curve on Mirage's website goes up to 8W in with 100W+ out.  My 
>K144XV only puts out about 7-8 watts so I have never had any problems with 
>over driving it.
>
> Mike
> KI0HA
>
>
> On 4/15/2014 8:26 PM, Harry_Yingst wrote:
>> I installed the internal 2 meter module in my K3 so now I'm in the
>> market for a good Amplifier to bring it up to at least 100 watts.
>>
>> The K3 puts out 10 watts so the amp needs to be 10 Watts input
>>
>> Any Suggestions?
>>
>> Thank you
>>
>>
>>
>>
>>
>>
>>
>> --
>> View this message in context: 
>> http://elecraft.365791.n2.nabble.com/Suggestions-for-a-2-meter-amp-tp7587334.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to mteberle at mchsi.com
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pincon at erols.com