[Elecraft] K3 & M/M Contest stations

[W0MU Mike Fatchett]

Sounds like something for the list...

This would be a handy feature!

Mike W0MU

On 4/14/2014 10:59 PM, Ed Muns wrote:
> K3 configurations are not transferable to other K3s.  Some of the
> configuration parameters are specific to the K3, like the gain calibration
> and VCO parameters.
>
> Accordingly, the K3 Utility only allows configurations to be restored to the
> same serial number K3 that they were saved from.  This is a good thing.
>
> It would be nice if the radio non-specific configuration parameters were
> transferrable but that feature currently is not available.
>
> Ed W0YK
>
> Phil, W7OX wrote:
> I'm not sure. My recollection is that someone
> posted a few weeks ago that he has two K3s and
> could not load the config file save from one into
> his other one. I don't plan to be in a position to
> try that myself
>
> On 4/14/14, 8:48 PM, Chester Alderman wrote:
>> I think you can use the K3 Utility to save the K3 configuration, rename it
>> with your own call sign then save it, copy it to a flash card, and restore
>> that configuration on a different K3 from its K3 Utility. I don't know if
>> anyone has tried this, but saving and restoring the K3 configuration is
>> contained in the K3 Utility.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w0mu at w0mu.com