[Elecraft] PR6 Hookup

[Cady, Fred]

HI Dwight,
You hook it to Bypass In.  In order to use the receive antenna, the PR6 needs to be turned off.  If you are using DIGOUT1 to control the PR6, it may not be turning off when DIGOUT1 is off is you have the KAT500 and KPA500 and are using the KPAK3AUX cables.
Cheers and 73,
Fred KE7X

"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
www.ke7x.com or www.lulu.com 
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide
(Coming soon: "The Elecraft KPA500 and KAT500 - the K-Line Dream Station")


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of DGB
> Sent: Friday, April 11, 2014 3:21 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] PR6 Hookup
> 
> when hooking up the PR6, which do I connect my 160m rcv antenna to, the
> bypass out or in?
> 
> tnx 73 Dwight NS9I
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to fcady at ece.montana.edu