[Elecraft] KX3: thermal frequency drift

[Phil Genera]

On Fri, Apr 11, 2014 at 4:55 PM, Bruce Beford <beford at myfairpoint.net>wrote:

> > It was suggested I do the Temp Compensation Procedure.  Unfortunately
> > I do not have a stable 50-MHz signal source.
>
> Ed,
> I did mine using the 5th harmonic from my Trimble Thunderbolt GPSDO. I
> think
> I used about 60dB of attentuation between the oscillator and the rig, I
> don't recall exactly. If you have a precision 10 MHz reference (and I
> believe you do), you could use that similarly.
>
> 73,
> Bruce N1RX
>
>
I did the same without any attenuation, and both kx3s survived :).

-- 
Phil
kj6pon