[Elecraft] Using the K3 ACC socket

[Jim Miller]

I'm using the Winford boards along with the DIN rails mounted on an
aluminum panel by my desk. Very nice way to break out the AUX connector as
well as to break out pins from RS232 lines to perform other functions. The
little bit of proto room on each board makes adding translator transistors,
etc, easy.

73

jim ab3cv


On Fri, Apr 11, 2014 at 9:04 AM, Slava Baytalskiy <slavka at nullserv.com>wrote:

> Hi everyone!
> I have a question about the ACC socket on the K3.
> I saw on HamNation that Icom IC-7000 gives you this ACC pigtail cable with
> all the leads marked, so that you could plug it in and easily pick out the
> pins you need to use for whatever it is you're doing.
> Does Elecraft have something like that available? I couldn't really find
> one...
> Instead, i saw this thing online:
> http://www.winfordeng.com/products/brksd15hd.php
> Its a DB15HD breakout connector that gives you screw terminal for each of
> the pins (K3 does have the regular Female DB15 High Density, 3-row
> connector, right?).
> Is that something that you guys are using?
>
> This site seems to have a lot of these sort of connectors...
>
> Thanks!
> Slava B
> W2RMS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jim at jtmiller.com
>
>