[Elecraft] KAT500 Utility 1.14.4.10 beta test version available on our FTP site

[Dick Dievendorff]

Are you entering these commands from the command tester?   It takes almost 50 msec to wake up the microcontroller and several serial characters will arrive and are lost in that time. If you are entering commands from the command tester, it's better to turn off idle sleep. I have a command macro button set up with SL0;SL; to accomplish this.

The operate page works OK, right?

73 de Dick, K6KR



> On Apr 10, 2014, at 21:11, "Stan Gibbs, KR7C" <stan at kr7c.net> wrote:
> 
> With the new utility, I am still seeing incorrect responses from commands
> when the oscillator sleep is enabled.  The oscillator does start after one
> "an;" command, but the correct "AN1;" response does not occur until I send
> two more "an;" commands.
> 
> I would expect to see the correct response after the first "an;" command, as
> happens when the idle sleep is disabled.
> 
> 
> 
> 
> 
> -----
> 73, Stan - KR7C
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-Utility-1-14-4-10-beta-test-version-available-on-our-FTP-site-tp7586987p7587005.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com