[Elecraft] KRC2 and TS480

[Steve Bunting]

And for the list record, I can report that the mods reported to the group
by Robert, S57AW, work a treat. My TS-480 now talks seamlessly with the
KRC2. Thanks again Robert!

73
Steve
M0BPQ


On 8 April 2014 11:52, Steve Bunting <stephen.bunting at virgin.net> wrote:

> Hi everyone,
>
>
> I have KRC2 band decoder that I used ages ago with my K2 - it still works
> in that I can toggle bands when I hold the F1 button. I want to use it with
> my remote TS-480 but the radio CAT isn't currently driving KRC2 at all and
> I would like some advice on how to get it working, please.
>
>
> Current set up: I have used the Kenwood jumper positions from the KRC2
> manual and have a straight through serial cable from rig to KRC2. I am
> using 4800 baud (W7 and W8 in place) and the radio CAT works with my PC.
> The KRC2 is certainly in operate mode and I have a 13.8V PSU attached
> (stating the obvious!)
>
>
> Questions: I suspect I need to apply the handshake jumper between W14 and
> W17 for the TS-480? Does the position of W7 and W8 matter for 4800 baud?
> I'm assuming the manual is correct. Can any 480/KRC2 users comment on
> anything else I have missed?
>
>
>
> 73
>
> Steve
>
> M0BPQ
>