[Elecraft] PX3

[Matt Zilmer]

Hi Don and All,

Wayne already answered this question.  The PX3 is designed to accept
the KX3's I/Q outputs and will not work with the K3's IF output.  I
belive Wayne anticipated this type of quesion and posted a note
specifically to answer it.

73,
matt W6NIA


On Sat, 05 Apr 2014 15:17:00 -0400, you wrote:

>Ed,
>
>In my current ignorance, I don't know if the PX3 has an RF input. The 
>literature says it uses the RX I/Q as input - which means it will not 
>handle the 8 MHz IF output of the K3.
>It may be possible if one feeds the K3 IF output to an SDR device 
>(Softrock RX, LP-Pan, SDR-IQ, etc) which does have I/Q outputs, but who 
>knows at this time.
>
>At this point, it is only speculation on my part.
>
>73,
>Don W3FPR
>
>On 4/5/2014 2:56 PM, Edward R Cole wrote:
>> So that sounds like it can be used with the 1st IF of the K3.  Having 
>> both radios that makes the PX3 even more attractive.  Size is really 
>> nice for portable operating with KX3. And feed thru of computer 
>> control of KX3, nice!
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to mzilmer at roadrunner.com
Matt Zilmer, W6NIA
--
"Give me six hours to chop down a tree and I will
spend the first four sharpening the axe." -A. Lincoln