[Elecraft] P3 SVGA display problem 1920x1080

[Don Wilhelm]

Mike,

If you read the P3SVGA manual, it states that "For faster screen updates 
when using fixed tune
mode, we recommend setting the P3SVGA
resolution to 1440 x 900 or less. Note that
1440 x 900 will display correctly on
1920 x 1080 monitors."

That means that it will display a 1440 x 900 resolution OK on 1920 X 
1080 monitors, but it does not mean that it will fill the display.

73,
Don W3FPR

On 9/24/2013 8:16 PM, Mike K2MK wrote:
> I searched the archive and reviewed a 2012 thread on the subject of
> displaying the P3/SVGA on a 1920x1080 monitor. I thought this issue was
> resolved but I just puchased a 22" Asus monitor with a native resolution of
> 1920x1080 at 60Hz and the P3/SVGA does not fill the screen horizontally. It
> fills the screen completely vertically but leaves almost 1.5" of black
> screen on both sides. If I select 1440x900 it fills the screen fully. The
> 1920x1080-alt resolution produces an ill fitting display with unreadable
> text.
>