[Elecraft] [K3] K3/0 Remote Rig QRQ / QSK performance

[David Windisch]

If you get a 'net speed test from 
http://www.megapath.com/speedtestplus/ 
you will see latency and jitter stats.
In my experience, they make QSK not an option, running, as they do, 30-60ms
latency and 1-30ms jitter.
Oh well.
I use an MFJ422 (Curtis chip) keyer to get better control over other issues,
eg, "proper" weighting, rather than dot/dash ratio masquerading as weight
control, as in the keyer built in to the remoterig box. The delay in
sidetone from the far end will drive you nuts trying to send with the delay;
I turn the volume down so local sidetone predominates.
You might be able to get sorta-QSK at slow hand-key speeds.

Hth.
Brgds,
Dave, N3HE



--
View this message in context: http://elecraft.365791.n2.nabble.com/K3-K3-0-Remote-Rig-QRQ-QSK-performance-tp7579062p7579065.html
Sent from the Elecraft mailing list archive at Nabble.com.