[Elecraft] KPAK3AUX Cable Length

[Cady, Fred]

Hi Rich,
It's 36" long. If that's not long enough you can just get a 15-pin DE15HD cable to extend it. You only need one KPAK3AUX cable in your set up to isolate the K3 ACC signals that shouldn't be connected to the KPA500.
Try http://www.winfordeng.com and http://www.cablewholesale.com for 15-pin cables. Beware is using VGA cables.

Cheers,
Fred KE7X
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
www.ke7x.com or www.lulu.com
(Working on "The K-Line: KPA500 and KAT500")

Fred Cady
fcady at ieee dot org

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Richard Thorne
> Sent: Saturday, September 14, 2013 5:32 AM
> To: Elecraft Reflector
> Subject: [Elecraft] KPAK3AUX Cable Length
>
> How long is the KPAK3AUX cable?  Trying to determine if it's long
> enough
> to reach for my desk configuration.
>
> Can two cables be plugged together to make it longer to accommodate my
> setup.
>
> Thanks
>
> Rich - N5ZC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html