[Elecraft] K3 - Win4K3 Suite

[Tom]

There is no justification to say my software is so poorly written. That us very unprofessional 
Thanks joe 

Sent from my iPhone

On 2013-09-04, at 3:35 PM, "Joe Subich, W4TV" <lists at subich.com> wrote:

> 
> On 9/4/2013 3:10 PM, Karl-Heinz - DL2FAG wrote:
> > I  have  just  test  it  with  virtual  serial  ports (generated by an
> > external   application),   which   I   split  to  use  the ports (CAT,
> > Rotor, winkey etc) simultanouly on  different other running
> > application (like mixw, LOGic)
> 
> Then it sounds as if Win4K3 is so poorly written that it can not
> tolerate delay or can not tolerate unexpected data as would be the
> case if AI1; and the user changed bands.  The issue is most likely
> the "unexpected data" ...
> 
> It is good to know that Win4K3 fails with any virtual ports and this
> is not a microHAM specific issue.
> 
> 73,
> 
>   ... Joe, W4TV
> 
> 
> On 9/4/2013 3:10 PM, Karl-Heinz - DL2FAG wrote:
>> I  have  just  test  it  with  virtual  serial  ports (generated by an
>> external   application),   which   I   split  to  use  the ports (CAT,
>> Rotor, winkey etc) simultanouly on  different other running
>> application (like mixw, LOGic)
>> 
>> Unter  this  circumstances,  I was not able to run WIN4K3. So long the
>> ports  were  splitted,  WIn4K3  does  not  work  -  If  I  disable the
>> port-splittig, the Ports are fine for Win4K3
>> 
>> 73
>> 
>> Karl
>> DL2FAG
>> 
>> am Mittwoch, 4. September 2013 um 20:11 schrieben Sie:
>> 
>> 
>>> What is the issue with microHAM virtual ports?  If you trying to
>>> run both a logger on the CAT port and a second application on the
>>> 2nd CAT port, the second application must be low priority and do
>>> minimum polling.  Remember, the combined data rate of the serial
>>> port is only 38,400 bps maximum.  The K3/P3 combination needs to
>>> be able to keep up with not only the combined polling rate of
>>> *two* applications *plus* the overhead of communication between
>>> the K3 and P3 that the user/applications never see.
>> 
>>> 73,
>> 
>>>     ... Joe, W4TV
>> 
>> 
>>> On 9/4/2013 11:20 AM, Karl-Heinz Kuehlborn wrote:
>>>> Hi,
>>>> 
>>>> the  same  here  -  the  suite needs a "complete" access to the serial
>>>> ports  -  it worked partly, if I made the virtual ports just in a read
>>>> state.
>>>> 
>>>> Haven't  yet found a workable solution if you work with virtual serial
>>>> ports.
>>>> 
>>>> Karl
>>>> DL2FAG
>>>> 
>>>> am Mittwoch, 4. September 2013 um 17:13 schrieben Sie:
>>>> 
>>>>> Bill:
>>>> 
>>>>> I loved it until it was obvious there were BIG problems running with
>>>>> MicroHam Router virtual ports..
>>>> 
>>>>> W4CCS
>>>> 
>>>>> -----Original Message-----
>>>>> From: elecraft-bounces at mailman.qth.net
>>>>> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill
>>>>> Sent: Wednesday, September 4, 2013 6:40 AM
>>>>> To: elecraft at mailman.qth.net
>>>>> Subject: [Elecraft] K3 - Win4K3 Suite
>>>> 
>>>>> I understand Win4K3 Suite is much improved from its original offering,
>>>>> however, my 30 day test expired a long time ago and I am unable to try the
>>>>> newest version. Hence, the questions:
>>>> 
>>>>> Is anyone using Win4K3 Suite? If so, how do you like it? Any other comments?
>>>> 
>>>>> Thanks,
>>>> 
>>>>> Bill W2BLC
>>>> 
>>>>> ______________________________________________________________
>>>>> Elecraft mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Elecraft at mailman.qth.net
>>>> 
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> 
>>>>> ______________________________________________________________
>>>>> Elecraft mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Elecraft at mailman.qth.net
>>>> 
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html