[Elecraft] K2DSP adjustments

[Don Wilhelm]

John,

Can you get to the CW Filter display (C.1  .60  .80 for example)?
If so, the first number is the center frequency, and the 2nd is the 
filter width.
The one with the blinking "." is the one that will be changed by the 
BAND+ and BAND- buttons.
Set the center frequency for the highest value and the width to the 
wildest value and it should switch to LOPASS.

In other words, keep tapping the BAND+ button for the value that has the 
blinking "." and then hold BAND- to change the blinking "." to the other 
value - keep tapping BAND+ until you see LOPASS.

73,
Don W3FPR

On 9/2/2013 4:16 PM, John Wiener wrote:
> Hi I've had my K2 for about 7 yrs now.  wanted to play with the DSP controls a bit…I find I cannot set CF1 (CW digital filter 1) to LOW PASS
> as indicated in the directions…
>
> any thoughts?
>
> John
> AB8O
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>