[Elecraft] Using the k3 for WSPR

[Ralf Wilhelm]

Hi Mike,

I have no K3, but my understanding is that the 10138.7 is the frequency of the suppressed carrier and that 10140.2 means that you set your rig to 10138.7 kHz USB and feed audio at about 1.5 kHz, resulting in TX at 10140.2.

So, the QRG reading should not change.

Greetings

Ralf

DL6OAP



Am 01.09.2013 um 20:32 schrieb Mike Weir <ve3wdm at hotmail.com>:

> When using WSPR the TX and RX frequencies are not the same....for example on 30m the RX is 10.138700 and the TX is 10.140200. For those of you using the K3 does your read out on the K3 change to the TX freq then the rig goes into transmit? Mine is not and not sure if this is normal or if I have to set something to show this.
> Thanks
> Mike
> VE3WDM 
>                         
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html