[Elecraft] [KX3] Key KX3 from DXLabs using Elecraft USB cable

[Richard Ferch]

John,

You cannot configure Winwarbler to use the same Com port as Commander, 
but you can configure WinWarbler to send requests to Commander to use 
radio control commands for CW keying with a K3 or KX3. In the WinWarbler 
Configuration window under the CW tab, set the Keying method to Xcvr 
Ctrl App (lower left corner).

If you want to use a K1EL Winkeyer or direct serial port keying (DTR or 
RTS), you have to use a separate Com port.

73,
Rich VE3KI

W9LHG wrote:

> I'm trying to send CW from DXLabs to the KX3 with
> WinWarbler. At the same time, I'm also running
> Commander and DXKeeper.
>
> Commander controls the KX3 fine, and WW outputs CW
> but the KX3 doesn't recognize it. I had hoped that
> the same Com port 5 could be used for both.
>
> Anyone make that work, or are two Com ports required?