[Elecraft] CW Pitch Resolution

[drewko]

Guess I don't follow... When APF is engaged, SHIFT will change the APF
center frequency. If you dial SHIFT for 270, RIT for -30 Hz, then
SHIFT APF to 270 (assuming your PITCH is 300 Hz), signal will be
centerd with a 270 Hz tone. 

73,
Drew
AF2Z



On Wed, 23 Oct 2013 08:29:44 -0700 (PDT), you wrote:

>drewko wrote
>> If you want to go lower than 300 Hz for your preferred cw pitch you
>> could offset the RIT for the lower tone then compensate with SHIFT to
>> bring it back to the center of the filter. A keyswitch macro could do
>> this automatically if you hve a set pitch in mind, say 270.
>
>That doesn't work if you're using APF, which I always use for weak signals. 
>APF is linked to the actual PITCH setting.  I also use 200 Hz filters in
>diversity and 30 Hz away from their center would attenuate signals.
>
>73,  Bill